dmesg - MSI NVIDIA GeForce 8400GS
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-58-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #88-Ubuntu SMP Tue Dec 3 17:37:58 UTC 2013 (Ubuntu 3.2.0-58.88-generic 3.2.53)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Compaq-Presario GC662AA-ABA SR5113WM/IVY, BIOS 5.09 05/15/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f53a0] f53a0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007fef0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fef0000 page 4k
kernel direct mapping tables up to 7fef0000 @ 1fffc000-20000000
RAMDISK: 356b2000 - 36b51000
ACPI: RSDP 00000000000f74d0 00024 (v02 HPQOEM)
ACPI: XSDT 000000007fef30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: FACP 000000007fef9440 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: DSDT 000000007fef3280 06179 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
ACPI: FACS 000000007fef0000 00040
ACPI: SLIC 000000007fef9640 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: SSDT 000000007fef9800 001C4 (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001)
ACPI: HPET 000000007fef9a40 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
ACPI: MCFG 000000007fef9ac0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: APIC 000000007fef9580 0007C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000007fef0000
Initmem setup node 0 0000000000000000-000000007fef0000
NODE_DATA [000000007feeb000 - 000000007feeffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fef0
On node 0 totalpages: 523903
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 8124 pages used for memmap
DMA32 zone: 511796 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83136 r8192 d23360 u1048576
pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515710
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ dac2000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2025672k/2096064k available (6588k kernel code, 452k absent, 69940k reserved, 6617k data, 924k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1908.739 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.47 BogoMIPS (lpj=7634956)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 007ff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 26602 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 01
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7634.80 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 7fef0000 (12288 bytes)
print_constraints: dummy:
RTC time: 5:40:28, date: 01/05/14
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
node 0 link 0: io port [a000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f03fffff]
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x80000000-0xf3ffffff]
bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored)
pci_root PNP0A08:00: host bridge window [io 0xa000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:0a.0: [14f1:2f20] type 0 class 0x000780
pci 0000:01:0a.0: reg 10: [mem 0xfddf0000-0xfddfffff]
pci 0000:01:0a.0: reg 14: [io 0xcc00-0xcc07]
pci 0000:01:0a.0: PME# supported from D3hot D3cold
pci 0000:01:0a.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x80000000-0xf3ffffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
pci 0000:02:00.0: [10de:10c3] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
pci 0000:02:00.0: reg 30: [mem 0xfcf00000-0xfcf7ffff pref]
pci 0000:02:00.1: [10de:0be3] type 0 class 0x000403
pci 0000:02:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:09.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 000000007fef0000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-03]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x1c00-0x1c7f window]
pnp 00:00: [io 0xa000-0xffff window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xefffffff window]
pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0294-0x0297]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0294-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfefff000-0xfefff3ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xf0000000-0xf3ffffff]
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000d0000-0x000d3fff]
pnp 00:09: [mem 0x000f0000-0x000f7fff]
pnp 00:09: [mem 0x000f8000-0x000fbfff]
pnp 00:09: [mem 0x000fc000-0x000fffff]
pnp 00:09: [mem 0xfefff000-0xfefff0ff]
pnp 00:09: [mem 0x7fef0000-0x7fefffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0x7feeffff]
pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfefff000-0xfeffffff]
pnp 00:09: [mem 0xfff80000-0xfff80fff]
pnp 00:09: [mem 0xfff90000-0xfffbffff]
pnp 00:09: [mem 0xfffed000-0xfffeffff]
system 00:09: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xfefff000-0xfefff0ff] has been reserved
system 00:09: [mem 0x7fef0000-0x7fefffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x7feeffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfefff000-0xfeffffff] could not be reserved
system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:09.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x80000000-0xf3ffffff]
pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 6 [mem 0x80000000-0xf3ffffff]
pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1388900428.360:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 3956
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (13 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Freeing initrd memory: 21116k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 14:4:668
rtc_cmos 00:05: setting system clock to 2014-01-05 05:40:29 UTC (1388900429)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0xb (1900 MHz), vid 0xc
powernow-k8: fid 0xa (1800 MHz), vid 0xd
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 924k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1584k freed
Freeing unused kernel memory: 1188k freed
udevd[87]: starting version 175
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
usb 1-2: new high-speed USB device number 2 using ehci_hcd
ata2: port disabled--ignoring
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-6: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:fc:a4:7b:f2
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.0: setting latency timer to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
usb 1-2.3: new low-speed USB device number 4 using ehci_hcd
input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.3/1-2.3:1.0/input/input2
generic-usb 0003:06A3:8020.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:02.1-2.3/input0
input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.3/1-2.3:1.1/input/input3
generic-usb 0003:06A3:8020.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:02.1-2.3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-2.4: new full-speed USB device number 5 using ehci_hcd
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.4/1-2.4:1.0/input/input4
generic-usb 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.4/1-2.4:1.1/input/input5
generic-usb 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-2.4/input1
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HDP725050GLA380, GM4OA52A, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3160815AS, 3.CHF, max UDMA/100
ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
scsi: waiting for bus probes to complete ...
scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:1: Attached scsi generic sg2 type 0
sd 2:0:0:2: Attached scsi generic sg3 type 0
sd 2:0:0:3: Attached scsi generic sg4 type 0
scsi 4:0:0:0: Direct-Access ATA ST3160815AS 3.CH PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg5 type 0
sd 4:0:0:0: [sdf] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sdf: sdf1 sdf2
sd 4:0:0:0: [sdf] Attached SCSI disk
sd 2:0:0:3: [sde] Attached SCSI removable disk
sd 2:0:0:1: [sdc] Attached SCSI removable disk
sd 2:0:0:2: [sdd] Attached SCSI removable disk
md: bind
md: bind
md: bind
md: raid1 personality registered for level 1
bio: create slab at 1
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 157865082880
md0: unknown partition table
md: bind
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 1998520320
md1: unknown partition table
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
async_tx: api initialized (async)
raid6: int64x1 1565 MB/s
raid6: int64x2 2205 MB/s
raid6: int64x4 1437 MB/s
raid6: int64x8 1368 MB/s
raid6: sse2x1 2625 MB/s
raid6: sse2x2 3538 MB/s
raid6: sse2x4 3636 MB/s
raid6: using algorithm sse2x4 (3636 MB/s)
xor: automatically using best checksumming function: generic_sse
generic_sse: 5960.000 MB/sec
xor: using function: generic_sse (5960.000 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Adding 1951676k swap on /dev/md1. Priority:-1 extents:1 across:1951676k
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[484]: starting version 175
EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
lp: driver loaded but no devices found
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
MCE: In-kernel MCE decoding enabled.
type=1400 audit(1388900444.693:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=711 comm="apparmor_parser"
type=1400 audit(1388900444.693:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
type=1400 audit(1388900444.693:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
init: failsafe main process (1017) killed by TERM signal
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -111
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:05.0: setting latency timer to 64
ppdev: user-space parallel port driver
type=1400 audit(1388900445.745:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1116 comm="apparmor_parser"
type=1400 audit(1388900445.745:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1121 comm="apparmor_parser"
type=1400 audit(1388900445.753:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1121 comm="apparmor_parser"
type=1400 audit(1388900445.753:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1116 comm="apparmor_parser"
type=1400 audit(1388900445.753:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1116 comm="apparmor_parser"
type=1400 audit(1388900445.757:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1122 comm="apparmor_parser"
type=1400 audit(1388900445.757:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1122 comm="apparmor_parser"
forcedeth 0000:00:07.0: irq 42 for MSI/MSI-X
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: alsa-restore main process (1182) terminated with status 19
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x132f95 offMax=0x132f95
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
hda_codec: ALC888: BIOS auto-probing.
hda_codec: ALC888: SKU not ready 0x411111f0
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
snd_hda_intel 0000:02:00.1: PCI INT B -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disabling MSI
snd_hda_intel 0000:02:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input13
init: udev-fallback-graphics main process (1571) terminated with status 1
CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
eth0: no IPv6 routers present
show_signal_msg: 9 callbacks suppressed
nvidia-settings[2277]: segfault at 7ff4ad50d8a0 ip 00007ff4ad50d8a6 sp 00007fffaa3d4ba8 error 7 in libpixbufloader-xpm.so[7ff4ad509000+6000]